Android Tricks

The Flash Firmware using the QPST Flash Tool. How?

Flash Firmware using the QPST Flash Tool
Written by Rabia

In this guideline feature, we’ll show you the way to flash the firmware through the QPST Flash Tool. Also, Qualcomm powered devices are the foremost active players in custom development. They additionally typically than not outdo their competition (aka the likes of MediaTek, Exynos, and others). Right from the unlocking of the bootloader to flashing custom binaries, it manages to occupy the highest spot. This straightway interprets your ability to flash loads of custom ROMs, install a custom recovery like TWRP, or maybe gain body rights to your device through the root.

Once you are doing this, you’ll be in a very position to flash an excessiveness of different mods. However, these processes would possibly herald many risks furthermore. If not performed properly, then your device might finish in a very bootloop or maybe a soft-brick. However, if it happens to your Qualcomm devices, then there’s a handy resolution. As a result, victimization of the QPST Flash Tool, you’ll simply flash the stock code onto your device and convey it back to traditional operating condition. And during this guide, we’ll show you the way to try and do simply that. Follow on for the care directions.

Using the QPST Flash Tool to flash the firmware

Apart from unbricking your device, you’ll conjointly use the Qualcomm Product Support Tool. Using QPTS to manually update your device to the most recent version. This can typically are available handy. In case,  the OTA update is nonetheless to arrive on your device. On constant lines, this tool conjointly has some pretty different helpful functionalities furthermore. These embody the power to form and restore device backup, or monitor device standing through QPST Configuration.

Similarly, you’ll conjointly save the Programming knowledge through it. Then the very fact that let it directly load the stock firmware of your device proves to be the icing on the cake. In fact, it’s a one-stop tool to fulfill all of your device’s flashing desires. Therewith same, let’s currently begin with the guide to flash the firmware via the QPST Flash Tool. Follow on.

Precondition

  • Primarily, this guide is simply used for devices with Qualcomm processors because of the underlying chipset. In case, your device has another processor, then you ought to not attempt the below directions.
  • Secondly, this method can wipe off all the information on your device. Therefore,  it’s suggested to require a whole device backup beforehand.
  • Furthermore, you may conjointly have to be compelled to install the Qualcomm USB Drivers on your computer.
  • To download the firmware such as your device within the HEX format. Similarly, certify to induce hold of your device’s boot file additionally. This is able to be the BOOT_LOADER.HEX file, gift within the firmware that you downloaded.
  • Accordingly, transfer the most recent version of the QPST Flash Tool.

Instruction Step:

  • Firstly, to connect your device to the computer via USB cable.
  • After that, download and install the QPST Tool on your computer.
  • Now head over to its installation directory, the error is:

C:/ program file (x86) Qualcomm/QPST/ bin

  • You can see the QPSTConfig file, just double click to open it.
QPST Flash Tool for flashing
  • Once it starts, then go to its Port menu and you can see the COM <number> under Port, device model number under Phone, and the Enabled Status.
  • This implies that the connection is effectively settled. On the off chance, that you discover any of these missing, at that point re-check the driver installation.
  • Proceeding onward, go to the Start Clients segment and select Software Download starting from the drop menu.
how to flashing with QPST Flash Tool
  • Now, you can see the QPST Software Download menu. Press on the Browse button next to Phone Image, navigate to the downloaded HEX firmware for your android device and select it.
  • Afterward, click on the Browse next to Boot Image, navigate to and select the BOOT_LOADER.HEX file.
QPST Software download
  • Accordingly, you have loaded both firmware and boot files, click the start button. The flashing process shall now begin.
QPST Flash Tool flashing
  • Finished, the progress bar shall turn green and reaches 100%. You can now remove your device from the PC.

Finally, These were the all steps to flash the firmware via the Qualcomm Product support Flash Tool. In case, you found any queries, do let us know in the comments section below. 

Leave a Comment